If you’ve ever wanted to try your hand at woodworking, chances are building a dog house is high on your list. It seems so simple, right? And if you screw it up, it’s not like your dog is going to make fun of you.
Luckily, building a dog house can be one of the easiest projects to take on — provided you know what you’re doing, of course.
In this guide, we’ll show you how to build your very own dog house with step-by-step instructions.
What Kind of House Do You Want to Build?
Asking how to build a dog house is a very vague question; after all, there are almost as many kinds of dog houses as there are regular houses. So first, you have to decide what kind you want to make.
There are A-frames, igloos, houses with sun decks, basic boxes…the list goes on and on. However, they all should have a few basic things in common:
- A Raised Floor – this keeps the house off the cold ground, making it warmer and more inviting for your dog. It also prevents rainwater from getting in, and may discourage bugs as well.
- Room to Lie Down – this is your dog’s place to relax, so make sure she has plenty of room to do so. Your pup needs to have enough space to turn around and stretch out comfortably.
- Protection from the Elements – when the weather turns nasty, your dog will naturally want to crawl inside her house. You want to make sure that she has plenty of protection standing between her and the wind and snow. Ideally, this means building a separate room that’s off-set from the entrance.
- A Snug Interior – the house should mimic the kind of cave that a dog would naturally seek out in the wild; as a result, you want low-hanging ceilings and walls that aren’t much wider than your dog’s body.
- A Spot to Get In – the entrance should be big enough for your dog to enter easily, but not so huge that it lets lots of heat escape. You might want to consider adding a door or flap, too.
Once you understand these basic principles, you can make just about any kind of dog house your imagination can dream up. For the purposes of this example, we’re going to make a classic A-frame house.
The Planning Stage
Before you start, you need to do a little planning. Here are the main things you need to think about:
- How big should it be? This will let you know how much material you need to buy. Also, to answer this question, you’ll need to measure your dog from the tip of her nose to the base of her tail while standing, and from the top of her head to the ground while sitting.
- What should it be made out of? The answer to this will depend on how much you’re willing to spend, as well as what materials will best survive your particular climate. Typically, you’ll be buying 2x4s and sheets of plywood.
- Will it be insulated? We recommend insulating the house, as that will make it more comfortable for your pooch; however, it’s not essential unless you live in an especially frigid area. Just know that insulating it will drive up your costs and increase the build time.
Once you have a basic idea of what you’re building, you can start drawing up a blueprint. Use your dog’s dimensions to figure out the dimensions of the house, and remember that, at minimum, you’ll need six panels (front, back, top, bottom, and both sides).
Doing this planning should give you all the information you need to head to the hardware store. You can have the boards cut to your required dimensions there, or you can use a chop saw at home to do it yourself. We recommend having them cut the plywood, though, unless you have a fully-stocked shop at home.
Building the Base
Start off by building the base of the house. This is done by simply attaching four boards in a square or rectangular pattern, with a sheet of plywood or something similar on top.
Remember that you’ll want to elevate the floor off the ground. You can leave an air gap between the ground and the floor, or you can use two boards and fill the space with insulation.
To attach the boards, drill two pilot holes at the end of each board, then use wood screws to attach them to one another. You can also use nails or angle brackets if you prefer.
The floor can be attached with either screws or nails. You can also add a bed, carpet, or straw on top of the floor to give your pup a comfy spot to lay down.
Putting Up the Walls
Grab the plywood you’ll use for your four walls and set it aside. For an A-frame, you’ll want the front and back panels to be cut into a triangle at the top so that you have a base on which to set your roof.
Take your 2x4s and screw them into the base; you’ll want one at each corner with at least one in the middle on the sides and back. Also, add 2x4s across the top so that you have a perfect square, plus a board running down the middle.
By now, you should see the basic skeleton of your dog house. To finish the walls, it’s simply a matter of screwing your plywood panels onto the 2×4 studs you just put up.
You can then add the front and back as well. If you haven’t already done so, cut an entrance into the front panel using a jigsaw before you attach it to the frame. You may also want to add a stud running from the front panel to the back.
See Our Complete Guide on:
Step 1: Floor and Side Walls
Step 2: Front and Back Walls
Adding the Roof
There are a variety of roof styles you can choose from, ranging from plain wood to asphalt shingling. We’re using plain wood here, but if you live in an especially damp climate, you’ll want to weather-treat your plywood or opt for something less likely to rot.
The roof panels will lay right over the top of the existing frame (and if you’ve done things right so far, they should lay in perfectly). Screw them in, and you’re done!
That is, unless you want to paint the thing or add any bells and whistles like heat pads to the interior. We’d recommend doing both, but it’s not essential.
Practice Makes Perfect
All of the above steps should only take a few hours, and your speed will increase as you become a more capable carpenter.
The fact that it’s not much of a time commitment is especially nice because if you screw it up past the point of repair, you can start over without sacrificing too much of your time in the process.
Or you could just write off those few hours of your life and buy a premade one. We won’t tell anyone.
See also our dog house buyer’s guides: